Lay the shirt back on a flat table and iron the area you’ll be putting the stencil. Center the stencil on the top. I love to use blue painters take to maintain the stencil down. It retains the stencil well and doesn’t leave a residue. Tape down all four sides of the stencil, it will prevent you from inadvertently getting paint on the top away from the stencil.You’ll need ink that’s specially made for screen printing on fabrics. Speedball fabric screen printing paint is a fantastic brand to use, but there are lots of choices available. Buy Customized designed products with an ease of manufacturing on Digital Textile Printing Thailand | Custom Cotton Printing.

digital printing

Press firmly and maintain the squeegee at a 45-degree angle. Make sure that the paint covers the whole design. Hold the squeegee at 90 degrees to eliminate all the additional paint in the stencil.

Peel the stencil away along with the tape. This is my favorite part of PhotoEZ sheets. Conventional displays with the hard, wooden frames usually need to be cleaned with a garden hose if you don’t possess an industrial dimension sink in your dwelling. You may wash PhotoEZ sheets directly in the sink.

Allow the paint to fully dry. To speed up the drying process it is possible to use a hair-dryer.

Place a sheet of wax paper on top of the plan. Heat set the picture into the shirt. This basically “melts” the paint to the cloth, keeping it from flaking off or readily washing out from the washer. Keep the iron moving over the picture, you don’t need to burn off your shirt.